What raw materials can be recycled by copper aluminum radiator recycling machine ?

The copper aluminum radiator recycle machine can extract copper, aluminum, iron of scrap copper aluminum radiator. The raw materials can be almost all kinds of waste containing scrap radiator, like scrap air conditioning, waste car water tank and any electronic. You could get the raw materials from the scrap bus station and air conditioning recycling plant.

Scrap copper aluminum radiators

Generally, the scrap copper aluminum radiators collected are badly damaged and deformed. Copper aluminum radiator recycling machine is designed to recovery the metals from these materials. The whole process is mainly involved four procedures. First is shredding to shredder the raw materials which replace the traditional manual dismantling and reduce the manpower; Secondary is crushing them to crush the raw materials into small. Then separate out the aluminum because of different gravity of copper and aluminum by the air separation. And match one magnetic separation to separate the iron ,then the copper will be out from another exit.

Copper aluminum radiator recycling machine

As for the undeformed scrap radiator or the heat sink defective products of air conditioner radiator manufacturers or the scrap automobile cooling water tank, there is a simpler device, small stripping type radiator separator, which can separate out the copper tube and aluminum foil directly.

Both copper aluminum radiator recycling machine and small stripping type radiator separator made by DOING company have many advantages when recycling scrap radiators, here are some details:

Advantages of copper aluminum radiator recycling machine

1. The combine of shredding and crushing make sure the scrap radiator could be crush to be small and the high efficiency of separation.

2. The integrated design save the space and the high machine configuration make sure the 99.9%-100% separate rate of metals recovery.

3. There is dust removal collector equipped in the process line to make sure there isn’t dust fly around the machine and make the true environmental.

4. The 2-3 operators is enough by using the PLC control system to reduce the manpower and the cost.

Welcome inquiry if you have these raw material! Let us help you turn waste into treasure !